Gate、Globe & Check Valve
    Cast Valve
    Pressure Seal Valve
    API602 Forged Steel Valve
    API603 Stainless Steel Valve
    Bellow Sealed Valve
    Cryogenic Valve
    Wafer Check Valve
    Ball Valve
    Cast Steel Floating Ball Valve
    Forged Steel Floating Ball Valve
    Trunnion ball valve
    Top Entry Ball Valves
    Metal-to-metal Ball Valve
    Cryogenic Ball Valve
    Plug valve
    Pressure balance plug valve
    Jacket plug valves
    Pipeline Valves
    Slab gate
    Through Conduit Gate Valve
    Fully Welded Ball Valve
    Pig Ball Valve
    Full-opening Check Valve
    Knife Gate Valves
    Knife Gate Valve
    Oil drilling series
    Choke valve
    Ball valve
    globe choke valve
    wellhead and christmas tree
    FC gate valve
    Hydraumatic gate valve
    expanded gate
    Ball screw gate valve
    tubing head
    casing head
    CTRW horizontal series Marine pumps
    1W Series eddy pump
    CTRW horizontal series Marine pumps
    1W Series eddy pump
    IS Series Single Stage Centrifugal Pumps
    S Series Single Stage Double Suction Centrifugal Pump
    TROW Series Single-stage double-suction split volute centrifugal pump
    TRNS Series Single-stage double-suction split centrifugal pump
    ZX Series Self-priming Pumps
    PBG Series Canned Pipeline Pump
    SG Series Pipeline Pump
    TRGB Series Detachable Vertical Centrifugal Pump
    TRW Series Horizontal Centrifugal pump
    TRG Series Vertical Centrifugal Pumps
    D(DF、DY)、DG Series Horizontal Multi-stage Centrifugal Pump
    TRDW Series Horizontal Multistage Centrifugal Pumps
    TRDF Series Stainless Steel Vertical Multistage Centrifugal Pump
    TRDG Series Vertical Pipeline Multistage Centrifugal Pump
    TRDM and TRDM-B Series Multistage High-rise Feed Pump
    TRD and TRD-B Series Vertical Multistage Centrifugal Pumps
    QY Series fill oil type dive under water the electric pump
    NL Series Sewage and Slurry Pump
    WQK/QG with cutter type submersible sewage pump
    WQX Series submersible sewage and feculence pump
    XWJ Series Late-model Non-block Pulp Pumps
    QJ Series Deep Well Submersible Pump
    ZJ Series horizontal slurry pumps
    TRQZ and TRQH Series Axial-flow Pumps,Mixed-flow pumps
    ZW Series Self-priming Non-block Sewage Pumps
    JYWQ and JPWQ Series Automatic Agitating Sewage Pumps
    AS and AV Series Split Submersible Sewage Pumps
    AWQS Series Shredding Submersible Sewage Pump
    GW Series High Efficiency Non-block Sewage Pumps
    LW Series High Efficiency Non-block Sewage Pumps
    YW Series High Efficiency Non-block Sewage Pumps
    WQ (QW)Series High Efficiency Non-block Sewage Pumps
    FS series glass steel centrifugal pump
    WSY series glass steel under-liquid pump
    FSY series glass fiber plastics hydraulic pump
    JMZ、FMZ series self-priming wine pump, self-priming chemical pump
    CQG series high temperature magnetic drive pump
    FSB Series Fluoroplastic Alloy Centrifugal Pumps
    PF Series Highly Anticorrosion Centrifugal Pumps
    I-1B Series Underflow Pump(Screw Pump)
    G Series Single Screw Pumps
    IH Series Chemical Pumps
    AFB、FB Series Stainless steel Anticorrosion Pumps
    CQB Series Fluoroplastic Magnetic Driven Pumps
    ZCQ Series Self-priming Magnetic Driven Pumps
    CQ Series Magnetic Driven Pumps
    DBY Series Electric Diaphragm Pumps
    QBY Series Air-diven Pumps
You Are Here:Home >> Products >> MULTISTAGE CENTRIFUGAL PUMP SERIES >> Main Text
D(DF、DY)、DG Series Horizontal Multi-stage Centrifugal Pump
This series is a horizontal, single suction and multi-stage centrifugal pump, which adopts the hydraulic model of efficient and energy-saving products recommended by the sate, playing a leading technical role in the industry. It has such advantages as high efficiency, wide performance range, safe and stable operation, low noise, long life and easy installation and maintenance.

Product parameters

Flow Rate Range: 3.75~840 m3/h
Head Range: 19~684(Low/middle pressure)
Head Range: 409~1056(Sub-high pressure)
Operation Temperature:≤105℃ 
Matched Power: 3-440KW
Working Pressure: :≤3.0MPa 
Flow-through Material: Cast Iron

Features          D (DF, DY) and DG are horizontal, single-suction and multistage centrifugal pumps. Their suction inlets are in a horizontal direction while their discharge outlets are upward and vertical to the horizontal line. Their case part, including water inlet section, middle section, water discharge section and bearing body, are integrated through the tension bolts, The pump stage number can be selected in accordance with its lift head. (The water pump’s inlet and outlet directions can be customized).
  The rotor part of this series is mainly made up of the shaft and such parts mounted on the shaft as impeller, bushing and balance disc. Of them, the impeller quantity is subject to the pump stage umber. The parts mounted on the shaft are fastened with flat keys and spindle nuts to make them integrated with the shaft. The whole rotor is supported by rolling or sliding bearings on both ends. The bearings, subject to different types, all bear no axial force; instead, the axial force is balanced by the balance disc. When the pump is running, the rotor is allowed to move an axial movement in the pump case. The annular ball bearing is not allowed to be used. The rolling bearing shall be lubricated by grease while the sliding bearing by thin oil with the oil ring for self-lubrication and the circulating water for cooling.
  The sealing surfaces between the pump’s water inlet section, middle section and water outlet section all adopt the molybdenum disulphide grease for sealing. There’s a sealing ring, a guide vane bushing and so on mounted between the rotor and fixed parts for sealing. When the sealing ring and the guide vane busing are so worn to have an impact on the pump’s working performance, they shall be replaced.
  The shaft seal has two modes: mechanical and packing. D pump adopt the packing seal mostly while DF and DY pumps adopt mechanical seal generally. In case of packing seal, the packing ring shall be positioned accurately with a proper tightness of packing, subject to such a standard that the liquid can seep drop by drop. All sealing elements of the pump are mounted in the sealing chamber with a certain pressure of water inside the chamber for the purpose of water seal, cooling or lubrication. There is a removable bushing mounted on the shaft seal to protect the pump shaft.
  DG pump sub-high pressure pump adopt the structure of sliding bearing with thin oil lubrication generally. DG85-67 and DG155-67 pumps adopt the structure of either sliding bearing with thin oil lubrication or rolling bearing with grease lubrication. The rest types all adopts the structure of rolling bearing with grease lubrication. Generally the major parts of low/middle pressure pumps adopt high-quality cast iron while those of sub-high pressure pumps adopt cast or stainless steel.
  This series is directly driven by the prime motor through the elastic coupling. When viewed from the prime motor direction, the pump rotates clockwise.

1、D pump can be used to transport clear water containing no solid particles with a temperature lower than 80℃ or liquids with similar physical and chemical properties as clear water. It’s applicable for water supply and drainage works in mines, plants and cities.
2、DF pump can be used to transport corrosive liquids containing no solid particles with a temperature range of -20℃~105℃. The pump’s allowable inlet pressure shall be less than 0.6MPa.
3、DY pump can be used to transport oil and petroleum products containing no solid particles with a temperature range of -20℃~105℃ and a viscosity less than 120cP.
4、DG horizontal single-suction multi-stage centrifugal pump can be used to transport the clear water or other liquids with similar physical and chemical properties as clear water. It’s applicable for the water supply in low/middle/sub-high pressure boilers as well as for the high-pressure water supply and drainage in plants or cities. The temperature range of transported medium is -20℃~105℃; And the allowable inlet pressure shall be less than 0.6MPa.
5、In addition, our company can provide this pump series’ multi-outlet structure and function as required by customers. The user can select the pump’s material, sealing mode, structure, motor capacity and so on in a reasonable way in concentration, specific gravity and working temperature, the pump’s inlet pressure and so forth.

 Working Conditions

1, flow Q=3.75-840m3/h
2, head H=19-684 (middle and low pressure)
3, H=409-1056 (high pressure)
4, D (DF, FY), DG type pump with the same performance parameters and installation dimensions