Single screw pump is a new pump according to rotary meshing volume
principle and main working parts are eccentric screw (rotor) and
fixed lining (stator). The stator is made of non-toxic and tasteless
edible rubber.
Due to the special geometry of the second component, respectively,
to form a separate chamber and sealed, the medium introduced by the
uniform axial flow, internal flow rate is low, volume was unchanged,
the pressure is stable, and thus will not produce eddy current and
stirring. The output pressure of each stage pump is 0.6MPa, head 60m
(water), self suction height is generally above 6m.
Because the stator is made of many kinds of elastic material, this
kind of pump has the characteristics of high viscosity fluid
conveying and transporting with hard suspended granular medium or
medium containing fiber. The flow rate is proportional to the speed.
The pump has the advantages of compact structure, small size and
convenient maintenance. Strong adaptability to medium, steady flow,
low pressure pulsation, high self absorption capacity. Operating
temperature up to 120 degrees Celsius, if the need to transport 120
C -350 C high temperature medium, can be customized
.jpg)
.jpg)
.jpg)
